THIS IS A PAIR OF 4" TRAILER HUBS EACH WITH 2 TAPERED BEARINGS, GREASE NIPPLE AND DUST CAP - THE STUD SIZE IS 3/8th OF AN INCH CENTER BORE OUTER DIAMETER IS 65 mm

THESE HUBS ARE USED FOR THE 4" PCD WHEELS THAT HAVE A CENTER HOLE OF 67mm AND A SMALL CUT OUT TO TAKE THE GREASE NIPPLE THAT IS ON THE SIDE OF THE HUB.

WE ALSO HAVE THE 100mm PCD HUBS (WITH M12 STUDS) ON ANOTHER ADVERT.

YOU WILL RECEIVE A PAIR OF 4" PCD 4 STUD HUB SETS COMPLETE WITH FACTORY FITTED (3/8th) STUDS WHEEL NUTS AND BEARING CUPS WITH 1" DIAMETER TAPERED BEARINGS (OUTER BEARING IS 44643 / INNER IS 44643L) AND WITH METAL GREASE/DUST CAPS - SUITABLE FOR GROSS TRAILER WEIGHTS OF UP T0 750 KG (PER PAIR OF HUBS)

THESE ARE SUITABLE FOR INDEPENDENT SUSPENSION UNITS OR WELDED STUB AXLES WITH 1" SHAFTS